PS3安全升級4.30自製固件精華和要點提示

Tips #1 – Installing FW Safely

  • - Only install FW's via Recovery Menu (not to be confused with FSM).
  • - Avoid XMB install at all costs.
  • - Remove any disc / sd card / storage devices before installing any FW.
  • - Use a clean USB Storage Device with only the needed PUP structure in it.
  • - Make sure Toggle QA worked if you going to upgrade any CFW

 

Tips #1-安全的安裝固件

  • - 無論升級或降級系統請只恢復模式下安裝固件(不要跟PS3工廠模式混淆了,不一樣!)
  • - 儘量避免直接在XMB下升級或安裝固件
  • - 在安裝固件前,請確保移除所有光碟/sd卡/任何外接存儲設備等
  • - 使用一個乾淨的隨身碟,僅僅保留要使用的PUP檔案及其相關檔案結構(即升降級所用的固件檔案)
  • - 請確保Toggle QA已經正確安裝,然後才能再安裝其他自制固件

 

Tips #2 – Prepare PS3

  • - If you are on OFW 3.55, upgrade to Rogero CFW 3.55 [v3.7] [MD5: 8f8166b25d6bed891f292c77de5c4b28]
  • - If you are on CFW 3.55 (TrueBlue / Cobra / Rebug / Etc):
    • * Install Toggle QA PKG from the XMB and make sure the Controller combo works before proceeding.
    • * Only after making sure that the QA Combo works fine, upgrade to Rogero CFW 3.55 [v3.7] [MD5: 8f8166b25d6bed891f292c77de5c4b28]
  • - If you are already on Rogero 3.55 (v3.7), make sure that the QA Flag combo is working before proceeding.

 

Tips #2 準備PS3系統

  • - 如果你的當前系統是3.55官方系統(OFW 3.55),請首先平刷至Rogero CFW 3.55 [v3.7] [MD5: 8f8166b25d6bed891f292c77de5c4b28]
  • - 如果你的當前系統是3.55自制系統(CFW 3.55),如(True Blue/Cobra/Rebug等)
    • * 請首先在系統Install packages 菜單下安裝Toggle QA,並確認手柄的組合鍵能夠成功使用
    • * 確認組合鍵成功工作後,升級至Rogero CFW 3.55 [v3.7] [MD5: 8f8166b25d6bed891f292c77de5c4b28]
  • - 如果你已經是Rogero CFW 3.55 [v3.7],請再次確保QA flag正確安裝,組合鍵工作正常

 

Tips #3 – Properly using Toggle QA PKG

  1. - Install the PKG from the XMB
  2. - Run the installed 「Toggle QA」 application from the Game column, PS3 will black screen and beep 2 / 3 times then send you back to XMB.
  3. - Make sure to verify everything went well by going to Settings column and hover Network Settings, then press L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down (You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly)

UPDATE: thanks to @ryugen- for pointing out that if you leave any USB Device connected to the PS3 while using the Toggle QA application, it will give some problems, so please, make sure you disconnect any device connected to the USB slots while doing so .

 

Tips #3 正確使用Toggle QA Flag

  1. - 在XMB的install packages菜單下,安裝Toggle QA pkg
  2. - 在遊戲欄位執行安裝好的Toggle QA應用程式,PS3會黑屏並且會滴滴響2到3聲,然後回到XMB界面
  3. - 確保檢查所有設置都正常,如下步驟:進入系統「設定」,遊標移動到「網絡設定」,不要進入,然後按以下幾個組合鍵:L1 + L2 + L3 (按下左搖桿) + R1 + R2 + 方向鍵下鍵會出現:Edy Viewer,、Debug Settings、Install Package Files三個選項

更新:謝謝@ryugen指出當你不移除usb裝置就直接使用 Toggle QA軟體可能會有點問題,所以請確保當你要執行Toggle QA已經移除USB儲存裝置以保證Toggle QA正確執行。

 

Tips #4 – Installing Rogero CFW 4.30 (v1.0)

  • - The safest way to install it is to be on Rogero CFW 3.55 (v3.7), as I have mentioned on my previous tips, if you decide to do so on other CFW, is your choice.
  • - Make sure Toggle QA works
  • - Make sure all tips I mentioned earlier have been verified.
  • - Install Rogero CFW 4.30 (v1.0 / Patched ) via Recovery Menu [MD5: 7ADF524594D46EF669F4C64E07462631].

 

Tips #4 安裝Rogero CFW 4.30 (v1.0)

  • - 最安全的方式就是先安裝Rogero CFW 3.55 (v3.7),就像是我在Tips#1講過的一樣,如果你執意要從其他CFW升級,請自己承擔後果
  • - 確保 Toggle QA 正確安裝且正常工作
  • - 確保前面提到的所有Tips全部正確操作
  • - 在PS3恢復模式下安裝Rogero CFW 4.30 (v1.0) [MD5: 7ADF524594D46EF669F4C64E07462631].

 

Tips #5 – Finally, while on CFW 4.30, Install multiMAN v04.08.01 and PS3~dev_blind.zip provided by Rogero at Tortuga Cove.

  1. - Install multiMAN from XMB
  2. - Activate 「write access」 to 「dev_flash」 on multiMAN settings
  3. - Go to mmOS / file manager and locate the PS3~dev_blind.zip and double click it (pressing X twice)
  4. - Follow on-screen instructions and restart your PS3.

UPDATE: Thanks to @Simonbuck for pointing out that this is not needed on the latest Rogero CFW 4.30 「Full Pack」 released recently.

 

Tips #5 最後,安裝multiMAN v04.08.01 和 PS3~dev_blind.zip

  1.  在XMB安裝multiMAN v04.08.01
  2. 在multiMAN 設置中為「dev_flash」激活寫入權限(write access)
  3. 移至文件管理器,定位到PS3~dev_blind.zip,雙擊它。(按下手柄X鍵兩次)
  4. 根據屏幕提示重啟PS3

更新:謝謝@Simonbuck指出最新的Rogero CFW 4.30 「Full Pack」 不需要此Tips #5的操作!

 

Tips #6 – Making sure game backups are correct

  • - Make sure all games are unmodified and without 3.55 patches (SPRX/ EBOOT / SDAT / etc)
  • - Make sure you remove all Game updates from XBM->Game Data Utility, to make sure you didn't install any patched ones.
  • - Make sure you activate BD-Mirror on multiMAN for all games, you have to configure each game options with it.
  • - Make sure to use BD-ROM emulator (Standard) on multiMAN settings.

 

Tips #6 確保遊戲備份正確

  • - 確保所有遊戲沒有修改過for 3.55系統的補丁(如SPRX / EOOT /SDAT等)
  • - 確保移除所有遊戲更新,做法是:移至XBM->Game data Utility,確保你沒有安裝任何打過補丁的東東
  • - 確保在multiMAN中為所有遊戲開啟BD-Mirror選項,你需要用這種方法組態每一個遊戲的選項
  • - 確保在multiMAN的設置中使用BD-ROM emulator的選項

 

原文連結:http://www.tortuga-cove.com/forums/viewtopic.php?f=127&t=3791

 

, , , , ,
創作者介紹

宇若彎彎

周宇若 發表在 痞客邦 PIXNET 留言(0) 人氣()